Equipment Sanitizing:
Use 200 ml per 100L of clean water to sanitize previously cleaned and rinsed equipment.
Allow a contact time of 5 minutes.

Water Treatment (Swimming Pool):

To remove microbial contamination of water supplies to produce clean water, add 5 to 25 ml per 1,000L water as appropriate. Allow 20 min minimum contact time. Test water next day for residual chlorine level, target is a minimum of 0.05 ppm. Please be aware chlorine may be low if the product is six months older than label date. Use rate should be increased accordingly to ensure sufficient residual.

Environmental Cleaning:

Mix ratio of 2 parts clean water to 1 part Hypo. Minimum contact time of 10 minutes. Rinse thoroughly with clean water. Some particularly heavy soiled areas may require some scrubbing.

WILL REMOVE MOSS, ALGAE, MOULD, MILK FATS AND PREVENT CONCRETE SLIPPERINESS.